1-818-265-0702

order@SaxtonIndustrial.com

Size And Designs

General

Saxton’s family of recognition trees allows for a wide variety of designs as well as flexibility. Many of these trees may be installed as the base model and added onto as the need for additional recognition increases.

Designs
The following designs utilize a full size cast bronze tree trunk or a cutout yellow brass trunk:

Size and Designs

General

Saxton’s family of recognition trees allows for a wide variety of designs as well as flexibility. Many of these trees may be installed as the base model and added onto as the need for additional recognition increases.

Designs
The following designs utilize a full size cast bronze tree trunk or a cutout yellow brass trunk

T1 Traditional (Cast bronze trunk)
C1 Contemporary (Yellow brass trunk)

T1 Traditional (Cast bronze trunk)
C1 Contemporary (Yellow brass trunk)

  • Size: 63″ Wide X 72″ High
  • Capacity: 279 leaves
  • Leaf Design: Standard

1A Add-on Sides (2)

  • Usage: Left and right sides for T1 or C1 Trees
  • Capacity: 279 leaves
  • Leaf Design: Standard
1B Add-on Top
  • Usage: Top for T1 or C1 Trees
  • Capacity: 104 additional leaves
  • Note: Must be used with 1A sides
  • Leaf Design: Standard
 

1C Add-on Sides (2)

  • Usage: Sides to increase the capacity of T1 and C1 trees
  • Capacity: 135 additional leaves
  • Note: 1C sides must be used with 1A sides although they may be used without the 1B top
  • Leaf Design: Standard

T2 Traditional (Cast bronze trunk)
C2 Contemporary (Yellow brass trunk)

  • Size: 76″ Wide X 72″ High
  • Capacity: 350 Leaves
  • Leaf Design: Standard
  •  

T3 Traditional (Cast bronze trunk)
C3 Contemporary (Yellow brass trunk)

  • Size: 90″ Wide X 72″ High
  • Capacity: 450 Leaves
  • Leaf Design: Standard

3A Add-on Sides (2)

  • Usage: Left and right sides for T3 or C3 trees
  • Capacity: 225 additional leaves
  • Note: Must be used with 3B Add-on Top
  • Leaf Design: Standard
  • 3B Add-on Top
    • Usage: Top for T3 or C3 Trees
    • Capacity: 117 additional leaves
    • Note: Can be used with or without 3A Sides
    • Leaf Design: Standard

3C Add-on Sides (2)

  • Usage: Left and right sides for T3 or C3 trees
  • Capacity: 155 additional leaves
  • Note: Must be used with 3B Add-on Top; narrower sides for use with T3 or C3 Trees when space is limited
  • Leaf Design: Standard
  • T8 Traditional (Cast bronze trunk)
    • Size: 63″ Wide X 72″ High
    • Capacity: 188 Leaves
    • Leaf Design: French Curve

T9 Traditional (Cast bronze trunk)

  • Size: 76″ Wide X 65″ High
  • Capacity: 300 Leaves
  • Note: For use when available height is limited
  • Leaf Design: Standard
  • T10 Traditional (Cast bronze trunk)
    • Size: 63″ Wide X 101″ High
    • Capacity: 450 Leaves
    • Note: Taller version of T1 Tree for use when more leaves are required and height is available
    • Leaf Design: Standard

The following designs utilize a thinner version of the traditional cast bronze trunk and incorporate four small stones cast integral within the base of the trunk itself:

  • T4 Traditional (Cast bronze trunk)
    • Size: 58″ Wide X 58″ High
    • Capacity: 125 Leaves
    • Note: The four small stones are cast integral for personalization
    • Leaf Design: French Curve

T4 Traditional (Cast bronze trunk)

  • Size: 58″ Wide X 58″ High
  • Capacity: 125 Leaves
  • Note: The four small stones are cast integral for personalization
  • Leaf Design: French Curve
  • 4A Add-on Sides (2)
    • Usage: Left and right sides for T4
    • Capacity: 50 additional leaves
    • Leaf Design: French Curve

4B Add-on Sides (2)

  • Usage: Left and right sides for T4
  • Capacity: 200 additional leaves
  • Leaf Design: French Curve
  • T6 Traditional (Cast bronze trunk)
    • Size: 71″ Wide X 58″ High
    • Capacity: 162 Leaves
    • Note: The four small stones are cast integral for personalization
    • Leaf Design: French Curve

T7 Traditional (Cast bronze trunk)

  • Size: 45″ Wide X 67″ High
  • Capacity: 200 Leaves
  • Note: The four small stones are cast integral for personalization
  • Leaf Design: Standard

The following designs utilize a version of the traditional cast bronze trunk with a double trunk and incorporate two larger stones cast integral with the base of the trunk:

T5 Traditional (Cast bronze trunk)

  • Size: 44″ Wide X 56″ High
  • Capacity: 80 Leaves
  • Note: The two large stones are cast integral for personalization
  • Leaf Design: French Curve

T11 Traditional (Cast bronze trunk)

  • Size: 44″ Wide X 56″ High
  • Capacity: 81 Leaves
  • Note: The two large stones are cast integral for personalization
  • Leaf Design: French Curve, installed in a random, scattered pattern

T12 Traditional (Cast bronze trunk)

  • Size: 44″ Wide X 56″ High
  • Capacity: 160 Leaves
  • Note: The two large stones are cast integral for personalization
  • Leaf Design: standard

Helpful Hints

  • Additional sizes and designs may be developed utilizing standard features (such as trunk and leaf designs)
  • Custom trunks, shapes and sizes may also be developed upon request
  • All recognition trees shown are for interior application only